Sets one to three IP addresses (with an optional port number) for Network Time Protocol (NTP) servers.
Using an NTP server enables all group members to have a consistent time.
If you want to change any of the servers in the NTP server list, you must re-enter all the IP addresses on the command line.
Format
grpparams ntp-server-list ip_address[:port]
Variable
|
ip_address[:port] |
One to three IP addresses, separated by a comma and no space, and optional port. The default port number is 123. |
Example
The following command specifies two NTP servers for the group:
> grpparams ntp-server-list 10.25.35.50:250,10.25.40.77