Specifies the number of seconds the group will wait for a RADIUS authentication server to respond before timing out.
For example, when a host attempts to connect to a volume (or a user attempts to log into an administration account), the group will try to contact a RADIUS authentication server. If the server does not respond within the timeout period, the attempt at contact will fail. Depending on the value of the radius-auth-retries parameter, the group may retry contacting the server.
To specify RADIUS authentication servers, see grpparams radius-auth-list.
Format
grpparams radius-auth-timeout n
Variable
|
n |
Number of seconds to wait for a response from a RADIUS authentication server. The default is 2 seconds. |
Example
The following command configures the group to wait 3 seconds for a RADIUS authentication server to respond:
> grpparams radius-auth-timeout 3