Displays the current values of all the group parameters or a specific list parameter.
Format
grpparams show [list-parameter]
Variable
|
list-parameter |
One of the following list parameters: • isns-server-list • smtp-server-list • email-list • radius-auth-list • syslog-server-list • ntp-server-list • radius-acct-list |
Examples
The following command displays an IP address for a remote syslog server:
> grpparams show syslog-server-list
Syslog Server List :: 182.1.12.144
The following command shows the values of the group parameters:
> grpparams show
___________________________ Group Information ___________________________
Name: group1 Group-Ipaddress: 111.19.106.140
Def-Snap-Reserve: 100% Def-Snap-Warn: 10%
Def-Snap-Depletion: delete-oldest Def-Thin-Growth-Warn: 60%
Def-Thin-Growth-Max: 100% DateAndTime: Wed May 2 14:50:28 2007
TimeZone: America/New_York Description:
Def-Iscsi-Prefix: Def-Iscsi-Alias: yes
iqn.2001-05.com.equallogic Info-Messages: enabled
Webaccess: enabled Webaccess-noencrypt: enabled
Cliaccess-SSH: enabled Cliaccess-Telnet: enabled
Email-Notify: enabled Syslog-Notify: enabled
iSNS-Server-List: Email-List: kabbott@company.com
NtpServers: Smtp-Server-List: 123.77.32.4
Syslog-Server-List: 111.23.4.56 Target-Auth-UserName:
Target-Auth-Password: pRJXHpjz2XbPBB2B
Rxr2RJPxhHPXjXBX Email-From: kabbott@company.com
Location: default Conn-Balancing: enabled
Discovery-Use-Chap: disabled Email-Contact:
Perf-balancing: enabled Disallow-Downgrades: yes
_________________________________________________________________________
__________________________ Radius Information ___________________________
radius-auth-list: login-radius-auth: disabled
radius-auth-retries: 1 radius-auth-timeout: 2secs
login-radius-acct: disabled radius-acct-retries: 1
radius-acct-timeout: 2secs iscsi-radius-auth: disabled
iscsi-local-auth: enabled radius-acct-list:
login-radius-attr: enabled radius-auth-secrets:
radius-acct-secrets:
_________________________________________________________________________
___________________________ Snmp Information ____________________________
read-only-comms: public read-write-comms:
trap-community: SNMP-trap snmp-managers: