Displays and sets SNMP (Simple Network Management Protocol) configuration parameters, such as community strings and trap destinations.
Format
grpparams snmp show|parameter
Parameters
|
read-only-comms string |
One or more read-only community strings, separated by commas and no spaces, used by the SNMP agent to authenticate SNMP requests. |
|
read-write-comms string |
One or more read-write community strings, separated by commas and no spaces, used by the SNMP agent to authenticate SNMP requests. |
|
snmp-managers string |
One or more SNMP managers, separated by commas and no spaces, that can set and receive SNMP traps. |
|
trap-community string |
Community string used by the SNMP agent when sending traps. |
|
trap-destinations ips |
Up to five IP addresses, separated by commas and no spaces, to which the SNMP agent sends traps. |
Example
The following command displays the current SNMP community strings and trap destination:
> grpparams snmp show
_______________________ Snmp Information _________________________
read-only-comms: read-write-comms:
trap-community: SNMP-trap snmp-managers: