Displays the configuration of the selected network interface.
Format
member select member_name eth select port show
Variables
|
member_name |
Name of a member. |
|
port |
Port number of the network interface that you want to modify or configure (0, 1, or 2). For example, specify 2 for eth2. |
Example
The following command displays the configuration for eth0:
> member select member7 eth select 0 show
____________________________ Eth Information ____________________________
Name: eth0 Status: up
Changed: Tue Jun 13 16:33:39 2006 Type: ethernet-csmacd
DesiredStatus: up Mtu: 9000
Speed: 1000000000 HardwareAddress: 00:09:8A:01:4A:6D
IpAddress: 182.19.1.47 NetMask: 255.255.255.0
Description: Eth-0