Displays the configuration of the network interfaces on the selected member.
Format
member select member_name eth show
Variable
|
member_name |
Name of a member. |
Example
The following command displays information about the network interfaces on a member:
> member select member7 eth show
Name ifType ifSpeed Mtu Ipaddress Status Errors
---- --------------- -------- ---- ----------- ------ -----
eth0 ethernet-csmacd 10000000 1500 182.19.1.47 down 0
eth1 ethernet-csmacd 10000000 1500 182.19.1.48 down 0
eth2 ethernet-csmacd 1000000000 9000 182.19.1.49 up 0