Enables you to select a partner and display the partner configuration, inbound and outbound replicas and replica sets, and failback replica sets.
Format
partner select partner_name show [parameter]
Parameters
|
failback-replicasets |
Displays the partner’s failback replica sets stored in the group. |
|
inbound-replicas |
Displays the partner’s replicas stored in the group. |
|
inbound-replicasets |
Displays the partner’s replica sets stored in the group. |
|
outbound-replicas |
Displays the group’s replicas stored on the partner. |
|
outbound-replicasets |
Displays the group's replica sets stored on the partner. |
Example
The following command shows configuration details for partner psgroup2:
> partner select psgroup2 show
_____________________ Partner Information _____________________
Name: psgroup2 IPAddress: 182.19.2.206
Space-Received: 0MB Space-Received-Used: 0MB
Outbound-Password: ********** OutboundDesiredStatus: enabled
Description: Space-Delegated: 200GB
Space-Delegated-Used: 150.03GB Inbound-Password: **********
InboundDesiredStatus: enabled Contact:
Email: Phone:
Mobile: Pool-Delegated: default
____________________ Outbound-replicasets _____________________
ReplicaSetName CurrReplicas Status Remaining StartingTime
-------------- ----------- ----- -------- -------------
staff1 23 ready 0MB None
dbvol 38 ready 0MB None
vol30 38 ready 0MB None
____________________ Outbound-repcolsets ______________________
Collection NoOfRepcols Status
-------------------- --------------------- ----------