Array Management Commands

The array management CLI commands are described in alphabetical order in Table 1: Array Management Commands. These commands act on an individual PS Series array and are often used to perform maintenance.

Table 1: Array Management Commands
Command	Description
clearlostdata	Clears lost data on an array, as described in clearlostdata.
diag	Gathers diagnostic information from an array, as described in diag.
ping	Verifies connectivity between an array and other hosts on the network, as described in ping.
reset	Resets an array to the factory defaults (original condition), as described in reset.
restart	Shuts down and restarts an array, as described in restart.
shutdown	Performs a clean shutdown of an array, as described in shutdown.
update	Updates the firmware on an array, as described in update.